Tools & Calculators
How much of each oil?
Enter your batch and the parts of each oil. Get the grams of every oil to weigh out, ready to write into your recipe.
Total fragrance for the batch
–
Enter a wax weight, a load between 0 and 100 percent, and parts for at least one oil.
| Oil | Share | In the batch | In the bottle |
|---|
- Fragrance (ounces)–
- Wax weight–
- Blend ratio–
Over your wax's maximum. Reduce the load, or check the figure on your supplier's data sheet.
Above the range most waxes allow. Check your wax's stated maximum before you use this load.
That is a lot of oils. Blends with more than four oils often turn muddy. Try dropping the weakest one.
How it works
The calculator takes the total fragrance for your batch (wax weight times the load) and divides it between your oils by their parts. Parts of 60, 30 and 10 and parts of 6, 3 and 1 give the same blend. Weigh each oil rather than counting drops, because oils differ in how big a drop is.
The load limit applies to the whole blend, not to each oil. Treat the blend as limited by its most restrictive oil: use the lowest maximum load and the lowest flash point among your oils, and check each safety data sheet. See Scent Blending for how to choose oils and test a blend, and save the result in theBurn Test Log.
These are estimates to start from. Always pour a test candle and confirm the numbers with your own supplier's data.

