Guides Start Here

Candle Making Glossary: Terms Every Maker Should Know

Plain-language definitions of candle making terms, from additive to wick tab: waxes, wicks, fragrance, burn problems, pouring, testing and selling, with links to the full guides.

Beginner8 min readUpdated October 14, 2026

A flat lay of candle making tools on a wooden table: a small digital scale, a steel pouring pitcher, a glass jar of wax, scattered metal wick tabs and a wooden wick centering clip

Candle making has a vocabulary of its own. Suppliers use it, guides assume you know it, and forums argue over it. If you have ever read a wax description and wondered what “hot throw” or “wet spots” meant, this page is for you. Each entry is short and in plain words, and where a term has a full guide or a tool, there is a link.

Use it as a reference. It is organized alphabetically, and the numbers and limits for your own candles always come from your supplier’s data sheet and your own burn tests, not from a glossary.

The parts of a container candle

Anatomy of a container candleCross-section of a container candle showing the flame, wick, melt pool, solid wax, wick tab, headspace and container.FlameBurns vaporized waxWickDraws melted wax upwardMelt poolShould reach the edgeSolid waxYour wax, curedWick tabAnchors the wickHeadspaceAbout ½ inchContainerHeat-safe vessel
The parts of a container candle: flame, wick, melt pool, solid wax, wick tab, headspace and container.

A

Additive. Anything added to wax to change how it looks or behaves, such as dye, fragrance or a performance ingredient. Some waxes come with additives already in them. See Candle Waxes Explained.

B

Base notes. The heavy, long-lasting parts of a fragrance, such as vanilla, amber, wood and musk. See Scent Blending 101.

Batch. All the candles made in one pour session from one pot of wax. See Candle Workshop Setup and Small-Batch Production.

Batch record. A written record of a batch: the recipe, the weights, the lots, the dates and what you noticed. It lets you repeat a good candle and trace a bad one.

Beeswax. Wax made by bees. It is hard to wick and needs more testing than most waxes. See Candle Waxes Explained.

Blend. A wax made of two or more waxes, often with additives. Most container waxes are blends. See also Master blend.

Blotter strip. A strip of absorbent paper used to smell a fragrance or a blend before using it in wax.

Burn rate. How much wax a candle burns per hour, worked out by weighing it before and after a test burn. See Burn Rate and Burn Time.

Burn test. Burning a candle under controlled conditions, with notes, to see how it behaves. See Burn Testing and Curing.

Burn time. How long a candle will last, estimated from its wax weight and its burn rate. See Candle Math Explained.

C

Coconut wax. A wax made from coconut oil, usually sold as a blend. See Candle Waxes Explained.

Cold throw. The scent of an unlit candle, which is what a customer smells when they lift the lid. See Candle Fragrance Explained.

Container candle. A candle poured and burned in its own container, such as a jar or tin. Container wax is softer than pillar wax.

Cure, curing. The wait after pouring, during which the wax finishes setting and the fragrance settles into it. A candle should cure for the time its wax supplier gives before you judge it. See the Pour and Cure Guide.

D

Double boiler. A pot of wax set inside a larger pot of hot water, so the wax is heated gently and indirectly. Never heat wax directly over a flame. See Candle Safety.

Drowning. When a flame is so small that it sinks into its own melted wax, or goes out. Usually a sign of a wick that is too small.

Dye. A colorant made for candles, sold as liquid, chips or blocks. See Candle Dye Explained.

E

Essential oil. A fragrant oil distilled or pressed from plants. Some work in candles, but they vary in strength and flash point, and natural does not mean safe. See Natural and Eco-Friendly Candles.

F

Flash point. The lowest temperature at which a liquid gives off enough vapor to ignite when there is a flame or spark nearby. Fragrance oils have flash points, listed in section 9 of the safety data sheet. See Reading a Safety Data Sheet.

Fragrance load. The weight of fragrance oil as a percentage of the weight of the wax. See the Fragrance Load Calculator.

Fragrance oil. A blend of aroma compounds, natural or synthetic or both, sold for candle making. Use only fragrance made for candles.

Frosting. A white, frosty or crystalline look on the surface or sides of a candle, common in some waxes such as soy. It is cosmetic and does not affect the burn. See Candle Troubleshooting.

H

Heart notes. The middle of a fragrance, such as flowers, fruit and spice, which carry its main character.

Heat gun. A hand tool that blows hot air, used to smooth the top of a candle or remove small flaws. Use it carefully.

Hot throw. How well a candle scents a room while it burns. It depends on the wick, the wax and the fragrance together.

L

Lot number. A code from a supplier that identifies the batch of a material. Write it in your batch record, because a new lot is a reason to retest.

M

Master blend. A blend of fragrance oils mixed ahead of time in a bottle and added to many batches. See the Scent Blend Calculator.

Maximum load. The most fragrance a wax can hold, given by the wax supplier. Never go over it.

Melt point. The temperature at which a wax melts. It is on the supplier’s data sheet, and it is not the same as the pour temperature.

Melt pool. The layer of liquid wax at the top of a burning candle. A good burn has a pool that reaches the edge of the container. Also called the burn pool.

Mold. A form used to shape pillar candles and wax melts. See Pillars, Votives and Wax Melts.

Multi-wick. A candle with more than one wick, usually in a wide container.

Mushrooming. A lump of carbon that builds on the tip of a wick, often from a wick that is too large or too long. Trim it after the candle has cooled.

N

Net weight. The weight of the product in a package. For a candle, it is the wax, fragrance and dye, not the wick, container or packaging. It goes on the label in ounces and grams. See Candle Labels and Compliance Basics.

Notes. The layers of a fragrance: top, heart and base notes, which are smelled at different times.

P

Paraffin. A wax made from petroleum. See Candle Waxes Explained.

Personal protective equipment (PPE). Gloves, eye protection and similar gear. Your safety data sheets say what to wear.

Pillar. A freestanding candle with no container, held up by a wall of solid wax. It needs its own wax and wicking, and it must be burned on a heat-safe plate or holder.

Pour temperature. The temperature at which a wax should be poured, from the supplier. It affects how a candle sets and how it looks.

Pouring pitcher. A pitcher with a spout and handle for melting and pouring wax.

R

Reference candle. A candle kept from each batch, labeled, so you can burn it later if a customer reports a problem.

S

Safety data sheet (SDS). A document from a supplier that describes a product’s hazards and how to handle and store it. See Reading a Safety Data Sheet.

Second pour. A second layer of wax poured on top of a candle to fill a sinkhole or smooth the surface. Also called a top-off.

Sinkhole. A hollow or crater around the wick that forms when wax shrinks as it cools. A second pour fixes it.

Snuffer. A small tool with a bell-shaped cup used to put out a candle without blowing on it.

Soy wax. A wax made from soybean oil, popular for container candles, and often sold as a blend. See Candle Waxes Explained.

Sweating. Beads of oil on the surface of a candle, often because there is too much fragrance or it was not mixed well.

T

Tab (wick tab). The small metal disc at the base of a wick that holds it upright in the container. Also called a sustainer.

Tealight. A small candle in a thin metal or plastic cup, usually with a pre-tabbed wick.

Throw. How far and how strongly a candle’s scent travels. See Cold throw and Hot throw.

Top notes. The light, quick parts of a fragrance, like citrus and mint, which are smelled first and fade first.

Trim. To cut a wick short, usually to about ¼ inch, before each burn.

Tunneling. When a candle burns down the middle and leaves a thick ring of wax against the container. Usually a sign of a wick that is too small, or first burns that were too short. See the Candle Troubleshooter.

V

Votive. A small candle, usually burned inside a holder. See Pillars, Votives and Wax Melts.

W

Wax melt (tart). A piece of scented wax with no wick, warmed in a warmer and never lit. See Pillars, Votives and Wax Melts.

Wax memory. A candle’s tendency to melt to the width of its first burn. It is why the first burn should reach the edge.

Wet spots. Patches where the wax has pulled away from the glass and looks dark or see-through. Usually cosmetic.

Wick. The braided cord that draws melted wax up to the flame. Its size must be matched to the wax and the container. See Candle Wicks Explained.

Wick centering device. A clip, bar or tool that holds a wick in the middle of the container while the wax sets.

Wick series. A family of wicks from one maker, sold in graded sizes. Different series are not interchangeable. See the Wick Selector.

Wick trimmer. A small tool for cutting a wick to length.

Wicking. Choosing and testing the wick for a candle.

How wick size changes the burnThree cross-sections of a burning container candle. A wick that is too small gives a tiny flame and a narrow tunnel. A correctly sized wick gives a steady flame and a full melt pool. A wick that is too large gives a tall smoky flame, a very hot deep pool and carbon buildup on the wick.Wick too smallFlame drowns in its own poolTunneling: wax left on the wallsWeak scent throwWick just rightSteady, moderate flameMelt pool reaches the edgeClean, even burnWick too largeTall, flickering, smoky flameVery hot glass and waxCarbon mushrooming on the wick
How wick size changes the burn: too small, just right, too large.

Where to go next


Questions or corrections? Send a note. Ready for the next step?Browse more guides.